How it works
Find errors at release, not at the FAT.
Model, drawing and BOM side by side. Every deviation at the spot where it sits.
01 How it works
Four steps, from upload to release.
-
01
Drag in your files
STEP model, drawings and BOM. The exports you already make.
-
02
BOMproof puts everything side by side
Quantities, numbers, title block, revisions and materials. In a few minutes.
All check points -
03
Every comment at the spot where it sits
1Pressure transmitter PT-104: model number differs. In the model PTX-40 (0–40 bar), on the BOM PTX-10 (0–10 bar).
-
04
Tick off and release
You review and tick off. The release stays your decision.
02 What it delivers
An error costs almost nothing, if you find it early.
-
Design
-
Release
BOMproof finds it here
-
Purchasing
-
Production and assembly
-
Pre-FAT
Often only found now
-
FAT
-
Find errors before purchasing
A change on your screen, not a part that has already been ordered.
-
No searching
Every comment sits at the spot itself.
-
The same check every time
Even under time pressure or when the experienced colleague is away.
-
Demonstrably released
Every report is kept, with what was ticked off.
03 Worked example
One wrong part, found just before the FAT.
An example with assumptions. You fill in your own numbers below.
The situation
- 1
Design
Dosing skid worth € 450,000. In the model: pressure transmitter 0–40 bar.
- 2
BOM
The same item has a different model number: 0–10 bar. Nobody notices.
- 3
Purchasing
Ordered and fitted according to the BOM.
- 4
Pre-FAT
During the 30 bar pressure test it goes out of range. Lead time: 3 weeks.
What it costs
example, excl. VAT
- Investigating and changing €1,020
- Correct pressure transmitter, rush order €1,850
- Workshop: dismantling and fitting again €1,040
- Pressure test and run check again €390
- Rescheduling the FAT €2,500
- Penalty for late delivery €4,500
Found at the pre-FAT
€11,300
Delivered 2 to 3 weeks later
Found at release
€43
No delay
04 Calculator
Work it out with your own numbers.
See how this works on your own design?
Book a 30-minute demo with your own files.