Reference
Standard parts, size by size
Dimensions per standard and per size in one place, each with its own dimensioned drawing. And because standard parts are in almost every BOM: how to write them so the same bolt doesn't show up under three names.
Families
Choose a standard
-
DIN 912 / ISO 4762
Socket head cap screw
Cylindrical head with hexagon socket: head, socket, thread, clearance hole and counterbore.
10 sizes
View the dimension table -
DIN 933 / ISO 4017
Hex head screw
Fully threaded hex head screw: width across flats (ISO and DIN), head height, clearance hole and tap drill.
10 sizes
View the dimension table -
DIN 934 / ISO 4032
Hex nut
Regular hex nut: width across flats and height per ISO 4032 and the old DIN 934, with the matching bolt.
10 sizes
View the dimension table
Why here
Standard parts and your BOM
With standard parts, BOMs often go wrong in how they are written: DIN 912 on one line, ISO 4762 on the next, and another description without a standard at all. That is three lines for one part. So every size also shows how to write it.
Ready for your first automated check?
Book a 30-minute demo. Bring one of your own designs and see live how BOMproof checks it.