Standard part · ISO 4762
Socket head cap screw ISO 4762 / DIN 912
The dimensions of socket head cap screws from M3 to M24 in one table, with clearance hole, counterbore and tap drill. Every size also has its own page with a drawing.
Dimension table
All dimensions in mm
| Size | Pitch P | dk | k | s | t min | b | Hole fine | Hole medium | C'bore ø | Tap drill |
|---|---|---|---|---|---|---|---|---|---|---|
| M3 | 0.5 | 5.5 | 3 | 2.5 | 1.3 | 18 | 3.2 | 3.4 | 6.5 | 2.5 |
| M4 | 0.7 | 7 | 4 | 3 | 2 | 20 | 4.3 | 4.5 | 8 | 3.3 |
| M5 | 0.8 | 8.5 | 5 | 4 | 2.5 | 22 | 5.3 | 5.5 | 10 | 4.2 |
| M6 | 1 | 10 | 6 | 5 | 3 | 24 | 6.4 | 6.6 | 11 | 5 |
| M8 | 1.25 | 13 | 8 | 6 | 4 | 28 | 8.4 | 9 | 15 | 6.8 |
| M10 | 1.5 | 16 | 10 | 8 | 5 | 32 | 10.5 | 11 | 18 | 8.5 |
| M12 | 1.75 | 18 | 12 | 10 | 6 | 36 | 13 | 13.5 | 20 | 10.2 |
| M16 | 2 | 24 | 16 | 14 | 8 | 44 | 17 | 17.5 | 26 | 14 |
| M20 | 2.5 | 30 | 20 | 17 | 10 | 52 | 21 | 22 | 33 | 17.5 |
| M24 | 3 | 36 | 24 | 19 | 12 | 60 | 25 | 26 | 40 | 21 |
dk and k are maximum values, t is a minimum, b is the reference value for long screws. Clearance hole to ISO 273, counterbore to DIN 974-1, tap drill = d minus P, rounded to the usual drill size.
The letters
What the dimensions mean
- d: nominal thread diameter (M8 = 8 mm).
- P: pitch of the coarse thread.
- dk: diameter of the cylindrical head.
- k: head height, equal to d for socket head cap screws.
- s: width across flats of the socket, so the size of your hex key.
- t: minimum depth of the socket.
- b: thread length on long screws; short screws are threaded up to the head.
- l: length of the screw, measured without the head.
Questions
Frequently asked questions about socket head cap screws
01 What is the difference between DIN 912 and ISO 4762?
DIN 912 was withdrawn and replaced by ISO 4762 (in Europe as DIN EN ISO 4762). The main dimensions in this table are the same for both, so in practice it is the same screw. You will see both names in BOMs: pick one, or the same screw looks like two different parts.
02 Which property class does a socket head cap screw have?
ISO 4762 lists 8.8, 10.9 and 12.9 in steel, and A2-70 and A4-70 in stainless steel (up to M24). Put the property class in the description in your BOM, otherwise purchasing doesn't know which screw you mean.
03 How long is the thread of a socket head cap screw?
On long screws the thread length b is about 2 × d + 12 mm (M8: 28 mm). Short screws are threaded up to the head. From which length a screw gets an unthreaded shank is listed per length in the standard.
Checked against
- ISO 4762:1997, tabel 1 (inkijkexemplaar)
- fasten.it: DIN EN ISO 4762:2004
- Reyher: Technische Informationen
- neue-physik.de: Durchgangslöcher (DIN EN 20273) en Senkungen (DIN 974-1)
- Albany County Fasteners: clearance holes ISO 273
- RUKO: Flachsenker DIN 373
- Strobel: Senkung en fase berekenen
- Optimas: tapping sizes
Every dimension on this page was checked on 15 November 2026 against at least two of these sources.
For a critical application, always check the dimensions in the standard or with your supplier.
Is this screw in your BOM twice?
Put model, drawing and BOM side by side and see per position what doesn't match.